T11-FC-SP-ZONING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, Counter32 FROM SNMPv2-SMI -- [RFC2578] TruthValue FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] ifIndex FROM IF-MIB -- [RFC2863] t11ZsServerEntry, t11ZsStatsEntry, t11ZsNotifyControlEntry, t11ZsFabricIndex FROM T11-FC-ZONE-SERVER-MIB -- [RFC4936] T11FcSpPolicyHashValue, T11FcSpPolicyHashFormat, T11FcSpHashCalculationStatus FROM T11-FC-SP-TC-MIB; t11FcSpZoningMIB MODULE-IDENTITY LAST-UPDATED "200808200000Z" ORGANIZATION "This MIB module was developed through the coordinated effort of two organizations: T11 began the development and the IETF (in the IMSS Working Group) finished it." CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Email: kzm@cisco.com" DESCRIPTION "This MIB module specifies the extensions to the T11-FC-ZONE-SERVER-MIB module that are necessary for the management of Fibre Channel's FC-SP Zoning Servers, as defined in the FC-SP specification. The persistence of values written to these MIB objects is the same as the persistence of the objects they extend, i.e., it is given by the value of the relevant instance of t11ZsServerDatabaseStorageType (defined in the T11-FC-ZONE-SERVER-MIB module). Copyright (C) The IETF Trust (2008). This version of this MIB module is part of RFC 5324; see the RFC itself for full legal notices." REVISION "200808200000Z" DESCRIPTION "Initial version of this MIB module, published as RFC 5324." ::= { mib-2 177 } t11FcSpZsMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 0 } t11FcSpZsMIBObjects OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 1 } t11FcSpZsMIBConformance OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 2 } t11FcSpZsConfiguration OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 1 } t11FcSpZsStatistics OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 2 } -- -- Augmenting the table of Zone Servers -- t11FcSpZsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcSpZsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which provides FC-SP-specific information about the Zone Servers on each Fabric in one or more Switches." ::= { t11FcSpZsConfiguration 1 } t11FcSpZsServerEntry OBJECT-TYPE SYNTAX T11FcSpZsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information relevant to FC-SP for a particular Zone Server for a particular Fabric on a particular Switch. The Fabric and Switch are identified in the same manner as in t11ZsServerEntry." AUGMENTS { t11ZsServerEntry } ::= { t11FcSpZsServerTable 1 } T11FcSpZsServerEntry ::= SEQUENCE { t11FcSpZsServerCapabilityObject BITS, t11FcSpZsServerEnabled TruthValue, t11FcSpZoneSetHashStatus T11FcSpHashCalculationStatus, t11FcSpActiveZoneSetHashType T11FcSpPolicyHashFormat, t11FcSpActiveZoneSetHash T11FcSpPolicyHashValue, t11FcSpZoneSetDatabaseHashType T11FcSpPolicyHashFormat, t11FcSpZoneSetDatabaseHash T11FcSpPolicyHashValue } t11FcSpZsServerCapabilityObject OBJECT-TYPE SYNTAX BITS { fcSpZoning(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Capabilities of the Zone Server for the particular Fabric on the particular Switch, with respect to FC-SP Zoning: fcSpZoning -- set to 1 to indicate the Switch is capable of supporting FC-SP Zoning. " REFERENCE "- ANSI INCITS 426-2007, T11/Project 1570-D, Fibre Channel - Security Protocols (FC-SP), February 2007, Table 184." ::= { t11FcSpZsServerEntry 1 } t11FcSpZsServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the Zone Server for the particular Fabric on the particular Switch, is operating in FC-SP Zoning mode." REFERENCE "- ANSI INCITS 426-2007, T11/Project 1570-D, Fibre Channel - Security Protocols (FC-SP), February 2007, Table 185." ::= { t11FcSpZsServerEntry 2 } t11FcSpZoneSetHashStatus OBJECT-TYPE SYNTAX T11FcSpHashCalculationStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When read, the value of this object is either: correct -- the corresponding instances of both t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash contain the correct hash values; or stale -- the corresponding instances of t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash contain stale (possibly incorrect) values; Writing a value of 'calculate' is a request to re-calculate and update the values of the corresponding instances of both t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash. Writing a value of 'correct' or 'stale' to this object is an error (e.g., 'wrongValue'). When the Active Zone Set and/or the Zone Set Database are updated, it is common that multiple changes need to be made at the same time. In such circumstances, the use of this object allows the hash values to be updated only once after all changes, rather than repeatedly/after each individual change. If and when the corresponding instance of t11ZsServerDatabaseStorageType has the value 'permanent(4)', then if write access is supported to any instance of a read-write object in any row of any table governed by the 'permanent' value of t11ZsServerDatabaseStorageType, then write access to the corresponding instance of this object must also be supported." REFERENCE "t11ZsServerDatabaseStorageType in 'Fibre Channel Zone Server MIB', RFC 4936, August 2007." DEFVAL { stale } ::= { t11FcSpZsServerEntry 3 } t11FcSpActiveZoneSetHashType OBJECT-TYPE SYNTAX T11FcSpPolicyHashFormat MAX-ACCESS read-only STATUS current DESCRIPTION "The format used for the hash value contained in the corresponding instance of t11FcSpActiveZoneSetHash." ::= { t11FcSpZsServerEntry 4 } t11FcSpActiveZoneSetHash OBJECT-TYPE SYNTAX T11FcSpPolicyHashValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the hash for the current Active Zone Set. The format of this value is given by the corresponding instance of t11FcSpActiveZoneSetHashType." REFERENCE "- ANSI INCITS 426-2007, T11/Project 1570-D, Fibre Channel - Security Protocols (FC-SP), February 2007, Table 187." ::= { t11FcSpZsServerEntry 5 } t11FcSpZoneSetDatabaseHashType OBJECT-TYPE SYNTAX T11FcSpPolicyHashFormat MAX-ACCESS read-only STATUS current DESCRIPTION "The format used for the hash value contained in the corresponding instance of t11FcSpZoneSetDatabaseHash." ::= { t11FcSpZsServerEntry 6 } t11FcSpZoneSetDatabaseHash OBJECT-TYPE SYNTAX T11FcSpPolicyHashValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the hash for the current Zone Set Database. The format of this value is given by the corresponding instance of t11FcSpZoneSetDatabaseHashType." REFERENCE "- ANSI INCITS 426-2007, T11/Project 1570-D, Fibre Channel - Security Protocols (FC-SP), February 2007, Table 187." ::= { t11FcSpZsServerEntry 7 } -- -- Additional Statistics for FC-SP Zoning -- t11FcSpZsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcSpZsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of statistics specific to FC-SP that are maintained by Zone Servers." ::= { t11FcSpZsStatistics 1 } t11FcSpZsStatsEntry OBJECT-TYPE SYNTAX T11FcSpZsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of statistics specific to FC-SP for a particular Zone Server for a particular Fabric on a particular Switch. The Fabric and Switch are identified in the same manner as in t11ZsStatsEntry." AUGMENTS { t11ZsStatsEntry } ::= { t11FcSpZsStatsTable 1 } T11FcSpZsStatsEntry ::= SEQUENCE { t11FcSpZsSPCMITrequestsSent Counter32, t11FcSpZsSPCMITrequestsAccepted Counter32, t11FcSpZsSPCMITrequestsRejected Counter32, t11FcSpZsZcpRequestsSent Counter32, t11FcSpZsZcpRequestsAccepted Counter32, t11FcSpZsZcpRequestsRejected Counter32, t11FcSpZsZirRequestsAccepted Counter32, t11FcSpZsZirRequestsRejected Counter32 } t11FcSpZsSPCMITrequestsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SP Commit Zone Changes (SPCMIT) operation requests sent by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 1 } t11FcSpZsSPCMITrequestsAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SP Commit Zone Changes (SPCMIT) operation requests received and accepted by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 2 } t11FcSpZsSPCMITrequestsRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SP Commit Zone Changes (SPCMIT) operation requests received but rejected by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 3 } t11FcSpZsZcpRequestsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Zoning Check Protocol (ZCP) requests sent by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 4 } t11FcSpZsZcpRequestsAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Zoning Check Protocol (ZCP) requests received and accepted by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 5 } t11FcSpZsZcpRequestsRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Zoning Check Protocol (ZCP) requests received but rejected by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 6 } t11FcSpZsZirRequestsAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Zoning Information Request (ZIR) requests received and accepted by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 7 } t11FcSpZsZirRequestsRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Zoning Information Request (ZIR) requests received but rejected by the Zone Server. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0." ::= { t11FcSpZsStatsEntry 8 } -- -- Enable/Disable for Notifications -- t11FcSpZsNotifyControlTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcSpZsNotifyControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of control information for notifications generated due to Zone Server events related to FC-SP Zoning." ::= { t11FcSpZsConfiguration 2 } t11FcSpZsNotifyControlEntry OBJECT-TYPE SYNTAX T11FcSpZsNotifyControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is an augmentation of the notification control information for a Zone Server for a particular Fabric on a particular Switch. The Fabric and Switch are identified in the same manner as in t11ZsNotifyControlEntry." AUGMENTS { t11ZsNotifyControlEntry } ::= { t11FcSpZsNotifyControlTable 1 } T11FcSpZsNotifyControlEntry ::= SEQUENCE { t11FcSpZsNotifyJoinSuccessEnable TruthValue, t11FcSpZsNotifyJoinFailureEnable TruthValue } t11FcSpZsNotifyJoinSuccessEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11FcSpZsFabricJoinFailureNotify notifications should be generated by the Zone Server for this Fabric." ::= { t11FcSpZsNotifyControlEntry 1 } t11FcSpZsNotifyJoinFailureEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11FcSpZsFabricJoinSuccessNotify notifications should be generated by the Zone Server for this Fabric." ::= { t11FcSpZsNotifyControlEntry 2 } -- -- Notifications -- t11FcSpZsFabricJoinSuccessNotify NOTIFICATION-TYPE OBJECTS { ifIndex, t11ZsFabricIndex } STATUS current DESCRIPTION "This notification indicates that a Switch that is part of one Fabric (indicated by the value of t11ZsFabricIndex) has successfully joined (on the interface indicated by the value of ifIndex) with a Switch that is part of another Fabric. If multiple Virtual Fabrics are configured on an interface, and all are successfully joined at the same time, and if the agent so chooses, then it can generate just one notification in which t11ZsFabricIndex has the value 4096." ::= { t11FcSpZsMIBNotifications 1 } t11FcSpZsFabricJoinFailureNotify NOTIFICATION-TYPE OBJECTS { ifIndex, t11ZsFabricIndex } STATUS current DESCRIPTION "This notification indicates that an E_Port on the local Switch has entered the Isolated state because a join between two Fabrics failed. The failure occurred on the local Fabric indicated by the value of t11ZsFabricIndex, on the interface indicated by the value of ifIndex. If multiple Virtual Fabrics are configured on an interface, and all have a failure to join at the same time, and if the agent so chooses, then it can generate just one notification in which t11ZsFabricIndex has the value 4096." ::= { t11FcSpZsMIBNotifications 2 } -- -- Conformance -- t11FcSpZsMIBCompliances OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 1 } t11FcSpZsMIBGroups OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 2 } t11FcSpZsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the extensions specified in FC-SP for Fibre Channel's Zone Server." MODULE -- this module MANDATORY-GROUPS { t11FcSpZsObjectsGroup, t11FcSpZsNotificationControlGroup, t11FcSpZsNotificationGroup } GROUP t11FcSpZsStatisticsGroup DESCRIPTION "These counters, containing Zone Server statistics, are mandatory only for those systems that count such events." -- Write access is not required for any objects in this MIB module: OBJECT t11FcSpZsServerEnabled MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FcSpZoneSetHashStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FcSpZsNotifyJoinSuccessEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FcSpZsNotifyJoinFailureEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { t11FcSpZsMIBCompliances 1 } -- Units of Conformance t11FcSpZsObjectsGroup OBJECT-GROUP OBJECTS { t11FcSpZsServerCapabilityObject, t11FcSpZsServerEnabled, t11FcSpZoneSetHashStatus, t11FcSpActiveZoneSetHashType, t11FcSpActiveZoneSetHash, t11FcSpZoneSetDatabaseHashType, t11FcSpZoneSetDatabaseHash } STATUS current DESCRIPTION "A collection of objects for Zone configuration information of a Zone Server capable of operating in FC-SP Zoning mode." ::= { t11FcSpZsMIBGroups 1 } t11FcSpZsNotificationControlGroup OBJECT-GROUP OBJECTS { t11FcSpZsNotifyJoinSuccessEnable, t11FcSpZsNotifyJoinFailureEnable } STATUS current DESCRIPTION "A collection of notification control objects for monitoring Zone Server failures specific to FC-SP." ::= { t11FcSpZsMIBGroups 2 } t11FcSpZsStatisticsGroup OBJECT-GROUP OBJECTS { t11FcSpZsSPCMITrequestsSent, t11FcSpZsSPCMITrequestsAccepted, t11FcSpZsSPCMITrequestsRejected, t11FcSpZsZcpRequestsSent, t11FcSpZsZcpRequestsAccepted, t11FcSpZsZcpRequestsRejected, t11FcSpZsZirRequestsAccepted, t11FcSpZsZirRequestsRejected } STATUS current DESCRIPTION "A collection of objects for collecting Zone Server statistics which are specific to FC-SP." ::= { t11FcSpZsMIBGroups 3 } t11FcSpZsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { t11FcSpZsFabricJoinSuccessNotify, t11FcSpZsFabricJoinFailureNotify } STATUS current DESCRIPTION "A collection of notification(s) for monitoring Zone Server events that are specific to FC-SP." ::= { t11FcSpZsMIBGroups 4 } END