SIP-COMMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, TimeTicks, Unsigned32, mib-2 FROM SNMPv2-SMI -- RFC 2578 RowStatus, TimeStamp, TruthValue FROM SNMPv2-TC -- RFC 2579 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC 2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 SipTCTransportProtocol, SipTCMethodName, SipTCEntityRole, SipTCOptionTagHeaders FROM SIP-TC-MIB -- RFC 4780 applIndex FROM NETWORK-SERVICES-MIB -- RFC 2788 InetPortNumber FROM INET-ADDRESS-MIB; -- RFC 4001 sipCommonMIB MODULE-IDENTITY LAST-UPDATED "200704200000Z" ORGANIZATION "IETF Session Initiation Protocol Working Group" CONTACT-INFO "SIP WG email: sip@ietf.org Co-editor Kevin Lingle Cisco Systems, Inc. postal: 7025 Kit Creek Road P.O. Box 14987 Research Triangle Park, NC 27709 USA email: klingle@cisco.com phone: +1 919 476 2029 Co-editor Joon Maeng email: jmaeng@austin.rr.com Co-editor Jean-Francois Mule CableLabs postal: 858 Coal Creek Circle Louisville, CO 80027 USA email: jf.mule@cablelabs.com phone: +1 303 661 9100 Co-editor Dave Walker email: drwalker@rogers.com" DESCRIPTION "Session Initiation Protocol (SIP) Common MIB module. This module defines objects that may be common to all SIP entities. SIP is an application-layer signaling protocol for creating, modifying and terminating multimedia sessions with one or more participants. These sessions include Internet multimedia conferences and Internet telephone calls. SIP is defined in RFC 3261 (June 2002). This MIB is defined for managing objects that are common to SIP User Agents (UAs), Proxy, Redirect, and Registrar servers. Objects specific to each of these entities MAY be managed using entity specific MIBs defined in other modules. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4780; see the RFC itself for full legal notices." REVISION "200704200000Z" DESCRIPTION "Initial version of the IETF SIP-COMMON-MIB module. This version published as part of RFC 4780." ::= { mib-2 149 } -- Top-Level Components of this MIB. sipCommonMIBNotifications OBJECT IDENTIFIER ::= { sipCommonMIB 0 } sipCommonMIBObjects OBJECT IDENTIFIER ::= { sipCommonMIB 1 } sipCommonMIBConformance OBJECT IDENTIFIER ::= { sipCommonMIB 2 } -- -- This MIB contains objects that are common to all SIP entities. -- -- Common basic configuration sipCommonCfgBase OBJECT IDENTIFIER ::= { sipCommonMIBObjects 1 } -- Protocol timer configuration sipCommonCfgTimer OBJECT IDENTIFIER ::= { sipCommonMIBObjects 2 } -- SIP message summary statistics sipCommonSummaryStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 3 } -- Per method statistics sipCommonMethodStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 4 } -- Per Status code or status code class statistics sipCommonStatusCode OBJECT IDENTIFIER ::= { sipCommonMIBObjects 5 } -- Transaction statistics sipCommonStatsTrans OBJECT IDENTIFIER ::= { sipCommonMIBObjects 6 } -- Method retry statistics sipCommonStatsRetry OBJECT IDENTIFIER ::= { sipCommonMIBObjects 7 } -- Other statistics sipCommonOtherStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 8 } -- Accessible-for-notify objects sipCommonNotifObjects OBJECT IDENTIFIER ::= { sipCommonMIBObjects 9 } -- -- Common Configuration Objects -- sipCommonCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the common configuration objects applicable to all SIP entities." ::= { sipCommonCfgBase 1 } sipCommonCfgEntry OBJECT-TYPE SYNTAX SipCommonCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common configuration. Each row represents objects for a particular SIP entity instance present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex } ::= { sipCommonCfgTable 1 } SipCommonCfgEntry ::= SEQUENCE { sipCommonCfgProtocolVersion SnmpAdminString, sipCommonCfgServiceOperStatus INTEGER, sipCommonCfgServiceStartTime TimeTicks, sipCommonCfgServiceLastChange TimeTicks, sipCommonCfgOrganization SnmpAdminString, sipCommonCfgMaxTransactions Unsigned32, sipCommonCfgServiceNotifEnable BITS, sipCommonCfgEntityType SipTCEntityRole } sipCommonCfgProtocolVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object will reflect the version of SIP supported by this SIP entity. It will follow the same format as SIP version information contained in the SIP messages generated by this SIP entity. For example, entities supporting SIP version 2 will return 'SIP/2.0' as dictated by the standard." REFERENCE "RFC 3261, Section 7.1" ::= { sipCommonCfgEntry 1 } sipCommonCfgServiceOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), up(2), down(3), congested(4), restarting(5), quiescing(6), testing(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the current operational state of the SIP application. unknown : The operational status cannot be determined for some reason. up : The application is operating normally and is processing (receiving and possibly issuing) SIP requests and responses. down : The application is currently unable to process SIP messages. congested : The application is operational but no additional inbound transactions can be accommodated at the moment. restarting : The application is currently unavailable, but it is in the process of restarting and will presumably, soon be able to process SIP messages. quiescing : The application is currently operational but has been administratively put into quiescence mode. Additional inbound transactions MAY be rejected. testing : The application is currently in test mode and MAY not be able to process SIP messages. The operational status values defined for this object are not based on any specific information contained in the SIP standard." ::= { sipCommonCfgEntry 2 } sipCommonCfgServiceStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the SIP entity was last started. If started prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sipCommonCfgEntry 3 } sipCommonCfgServiceLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the SIP entity entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sipCommonCfgEntry 4 } sipCommonCfgOrganization OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the organization name that the SIP entity inserts into Organization headers of SIP messages processed by this system. If the string is empty, no Organization header is to be generated." REFERENCE "RFC 3261, Section 20.25" ::= { sipCommonCfgEntry 5 } sipCommonCfgMaxTransactions OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of simultaneous transactions per second that the SIP entity can manage. In general, the value of this object SHOULD reflect a level of transaction processing per second that is considered high enough to impact the system's CPU and/or memory resources to the point of deteriorating SIP call processing but not high enough to cause catastrophic system failure." ::= { sipCommonCfgEntry 6 } sipCommonCfgServiceNotifEnable OBJECT-TYPE SYNTAX BITS { sipCommonServiceColdStart(0), sipCommonServiceWarmStart(1), sipCommonServiceStatusChanged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which SIP service related notifications are enabled. Each bit represents a specific notification. If a bit has a value 1, the associated notification is enabled and will be generated by the SIP entity at the appropriate time. Support for these notifications is OPTIONAL: either none or all notification values are supported. If an implementation does not support this object, it should return a 'noSuchObject' exception to an SNMP GET operation. If notifications are supported, this object's default value SHOULD reflect sipCommonServiceColdStart and sipCommonServiceWarmStart enabled and sipCommonServiceStatusChanged disabled. This object value SHOULD persist across reboots." DEFVAL { { sipCommonServiceColdStart, sipCommonServiceWarmStart } } ::= { sipCommonCfgEntry 7 } sipCommonCfgEntityType OBJECT-TYPE SYNTAX SipTCEntityRole MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the list of SIP entities to which this row is related. It is defined as a bit map. Each bit represents a type of SIP entity. If a bit has value 1, the SIP entity represented by this row plays the role of this entity type. If a bit has value 0, the SIP entity represented by this row does not act as this entity type. Combinations of bits can be set when the SIP entity plays multiple SIP roles." ::= { sipCommonCfgEntry 8 } -- -- Support for multiple ports -- sipCommonPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of ports that each SIP entity in this system is allowed to use. These ports can be advertised using the Contact header in a REGISTER request or response." ::= { sipCommonCfgBase 2 } sipCommonPortEntry OBJECT-TYPE SYNTAX SipCommonPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specification of a particular port. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonPort } ::= { sipCommonPortTable 1 } SipCommonPortEntry ::= SEQUENCE { sipCommonPort InetPortNumber, sipCommonPortTransportRcv SipTCTransportProtocol } sipCommonPort OBJECT-TYPE SYNTAX InetPortNumber (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object reflects a particular port that can be used by the SIP application." ::= { sipCommonPortEntry 1 } sipCommonPortTransportRcv OBJECT-TYPE SYNTAX SipTCTransportProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "This object will specify the transport protocol the SIP entity will use to receive SIP messages. This object is a bit map. Each bit represents a transport protocol. If a bit has value 1, then that transport protocol is currently being used. If a bit has value 0, then that transport protocol is currently not being used." ::= { sipCommonPortEntry 2 } -- -- Support for SIP option tags (SIP extensions). -- SIP extensions MAY be supported or required by SIP entities. -- sipCommonOptionTagTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonOptionTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of the SIP option tags (SIP extensions) that are either required, supported, or unsupported by the SIP entity. These option tags are used in the Require, Proxy-Require, Supported, and Unsupported header fields. Example: If a user agent client supports, and requires the server to support, reliability of provisional responses (RFC 3262), this table contains a row with the option tag string '100rel' in sipCommonOptionTag and the OCTET STRING value of '1010 0000' or '0xA0' in sipCommonOptionTagHeaderField. If a server does not support the required feature (indicated in a Require header to a UAS, or in a Proxy-Require to a Proxy Server), the server returns a 420 Bad Extension listing the feature in an Unsupported header. Normally, the list of such features supported by an entity is static (i.e., will not change over time)." REFERENCE "RFC 3261, Sections 19.2, 20.32, 20.29, 20.37, and 20.40" ::= { sipCommonCfgBase 3 } sipCommonOptionTagEntry OBJECT-TYPE SYNTAX SipCommonOptionTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular SIP option tag (extension) supported or unsupported by the SIP entity, and which may be supported or required by a peer. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonOptionTagIndex } ::= { sipCommonOptionTagTable 1 } SipCommonOptionTagEntry ::= SEQUENCE { sipCommonOptionTagIndex Unsigned32, sipCommonOptionTag SnmpAdminString, sipCommonOptionTagHeaderField SipTCOptionTagHeaders } sipCommonOptionTagIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a conceptual row in the table." ::= { sipCommonOptionTagEntry 1 } sipCommonOptionTag OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the SIP option tag. The option tag names are registered with IANA and available at http://www.iana.org." REFERENCE "RFC 3261, Section 27.1" ::= { sipCommonOptionTagEntry 2 } sipCommonOptionTagHeaderField OBJECT-TYPE SYNTAX SipTCOptionTagHeaders MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the SIP option tag is supported (Supported header), unsupported (Unsupported header), or required (Require or Proxy-Require header) by the SIP entity. A SIP option tag may be both supported and required." ::= { sipCommonOptionTagEntry 3 } -- -- Supported SIP Methods -- sipCommonMethodSupportedTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonMethodSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of methods supported by each SIP entity in this system (see the standard set of SIP methods in Section 7.1 of RFC 3261). Any additional methods that may be incorporated into the SIP protocol can be represented by this table without any requirement to update this MIB module. The table is informational in nature and conveys capabilities of the managed system to the SNMP Manager. From a protocol point of view, the list of methods advertised by the SIP entity in the Allow header (Section 20.5 of RFC 3261) MUST be consistent with the methods reflected in this table." ::= { sipCommonCfgBase 4 } sipCommonMethodSupportedEntry OBJECT-TYPE SYNTAX SipCommonMethodSupportedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular method supported by the SIP entity. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonMethodSupportedIndex } ::= { sipCommonMethodSupportedTable 1 } SipCommonMethodSupportedEntry ::= SEQUENCE { sipCommonMethodSupportedIndex Unsigned32, sipCommonMethodSupportedName SipTCMethodName } sipCommonMethodSupportedIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a conceptual row in the table and reflects an assigned number used to identify a specific SIP method. This identifier is suitable for referencing the associated method throughout this and other MIBs supported by this managed system." ::= { sipCommonMethodSupportedEntry 1 } sipCommonMethodSupportedName OBJECT-TYPE SYNTAX SipTCMethodName MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the supported method's name. The method name MUST be all upper case (e.g., 'INVITE')." ::= { sipCommonMethodSupportedEntry 2 } -- -- SIP Timer Configuration -- sipCommonCfgTimerTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonCfgTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains timer configuration objects applicable to SIP user agent and SIP stateful Proxy Server entities." ::= { sipCommonCfgTimer 1 } sipCommonCfgTimerEntry OBJECT-TYPE SYNTAX SipCommonCfgTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of timer configuration. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The objects in this table entry SHOULD be non-volatile and their value SHOULD be kept at reboot." INDEX { applIndex } ::= { sipCommonCfgTimerTable 1 } SipCommonCfgTimerEntry ::= SEQUENCE { sipCommonCfgTimerA Unsigned32, sipCommonCfgTimerB Unsigned32, sipCommonCfgTimerC Unsigned32, sipCommonCfgTimerD Unsigned32, sipCommonCfgTimerE Unsigned32, sipCommonCfgTimerF Unsigned32, sipCommonCfgTimerG Unsigned32, sipCommonCfgTimerH Unsigned32, sipCommonCfgTimerI Unsigned32, sipCommonCfgTimerJ Unsigned32, sipCommonCfgTimerK Unsigned32, sipCommonCfgTimerT1 Unsigned32, sipCommonCfgTimerT2 Unsigned32, sipCommonCfgTimerT4 Unsigned32 } sipCommonCfgTimerA OBJECT-TYPE SYNTAX Unsigned32 (100..1000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the initial value for the retransmit timer for the INVITE method. The retransmit timer doubles after each retransmission, ensuring an exponential backoff in network traffic. This object represents the initial time a SIP entity will wait to receive a provisional response to an INVITE before resending the INVITE request." REFERENCE "RFC 3261, Section 17.1.1.2" DEFVAL { 500 } ::= { sipCommonCfgTimerEntry 1 } sipCommonCfgTimerB OBJECT-TYPE SYNTAX Unsigned32 (32000..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP entity will wait to receive a final response to an INVITE. The timer is started upon transmission of the initial INVITE request." REFERENCE "RFC 3261, Section 17.1.1.2" DEFVAL { 32000 } ::= { sipCommonCfgTimerEntry 2 } sipCommonCfgTimerC OBJECT-TYPE SYNTAX Unsigned32 (180000..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP Proxy Server will wait to receive a provisional response to an INVITE. The Timer C MUST be set for each client transaction when an INVITE request is proxied." REFERENCE "RFC 3261, Section 16.6" DEFVAL { 180000 } ::= { sipCommonCfgTimerEntry 3 } sipCommonCfgTimerD OBJECT-TYPE SYNTAX Unsigned32 (0..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the amount of time that the server transaction can remain in the 'Completed' state when unreliable transports are used. The default value MUST be equal to or greater than 32000 for UDP transport, and its value MUST be 0 for TCP/SCTP transport." REFERENCE "RFC 3261, Section 17.1.1.2" DEFVAL { 32000 } ::= { sipCommonCfgTimerEntry 4 } sipCommonCfgTimerE OBJECT-TYPE SYNTAX Unsigned32 (100..1000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the initial value for the retransmit timer for a non-INVITE method while in 'Trying' state. The retransmit timer doubles after each retransmission until it reaches T2 to ensure an exponential backoff in network traffic. This object represents the initial time a SIP entity will wait to receive a provisional response to the request before resending the non-INVITE request." REFERENCE "RFC 3261, Section 17.1.2.2" DEFVAL { 500 } ::= { sipCommonCfgTimerEntry 5 } sipCommonCfgTimerF OBJECT-TYPE SYNTAX Unsigned32 (32000..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP entity will wait to receive a final response to a non-INVITE request. The timer is started upon transmission of the initial request." REFERENCE "RFC 3261, Section 17.1.2.2" DEFVAL { 32000 } ::= { sipCommonCfgTimerEntry 6 } sipCommonCfgTimerG OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the initial value for the retransmit timer for final responses to INVITE requests. If timer G fires, the response is passed to the transport layer again for retransmission, and timer G is set to fire in MIN(2*T1, T2) seconds. From then on, when timer G fires, the response is passed to the transport again for transmission, and timer G is reset with a value that doubles, unless that value exceeds T2, in which case, it is reset with the value of T2. The default value MUST be T1 for UDP transport, and its value MUST be 0 for reliable transport like TCP/SCTP." REFERENCE "RFC 3261, Section 17.2.1" DEFVAL { 500 } ::= { sipCommonCfgTimerEntry 7 } sipCommonCfgTimerH OBJECT-TYPE SYNTAX Unsigned32 (32000..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a server will wait to receive an ACK before it abandons retransmitting the response. The timer is started upon entering the 'Completed' state." REFERENCE "RFC 3261, Section 17.2.1" DEFVAL { 32000 } ::= { sipCommonCfgTimerEntry 8 } sipCommonCfgTimerI OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP entity will wait to receive additional ACK message retransmissions. The timer is started upon entering the 'Confirmed' state. The default value MUST be T4 for UDP transport and its value MUST be 0 for reliable transport like TCP/SCTP." REFERENCE "RFC 3261, Section 17.2.1" DEFVAL { 5000 } ::= { sipCommonCfgTimerEntry 9 } sipCommonCfgTimerJ OBJECT-TYPE SYNTAX Unsigned32 (32000..300000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP server will wait to receive retransmissions of non-INVITE requests. The timer is started upon entering the 'Completed' state for non-INVITE transactions. When timer J fires, the server MUST transition to the 'Terminated' state." REFERENCE "RFC 3261, Section 17.2.2" DEFVAL { 32000 } ::= { sipCommonCfgTimerEntry 10 } sipCommonCfgTimerK OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the maximum time a SIP client will wait to receive retransmissions of responses to non-INVITE requests. The timer is started upon entering the 'Completed' state for non-INVITE transactions. When timer K fires, the server MUST transition to the 'Terminated' state. The default value MUST be T4 for UDP transport, and its value MUST be 0 for reliable transport like TCP/SCTP." REFERENCE "RFC 3261, Section 17.1.2.2" DEFVAL { 5000 } ::= { sipCommonCfgTimerEntry 11 } sipCommonCfgTimerT1 OBJECT-TYPE SYNTAX Unsigned32 (200..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the T1 timer for a SIP entity. T1 is an estimate of the round-trip time (RTT) between the client and server transactions." REFERENCE "RFC 3261, Section 17" DEFVAL { 500 } ::= { sipCommonCfgTimerEntry 12 } sipCommonCfgTimerT2 OBJECT-TYPE SYNTAX Unsigned32 (200..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the T2 timer for a SIP entity. T2 is the maximum retransmit interval for non-INVITE requests and INVITE responses. It's used in various parts of the protocol to reset other Timer* objects to this value." REFERENCE "RFC 3261, Section 17" DEFVAL { 4000 } ::= { sipCommonCfgTimerEntry 13 } sipCommonCfgTimerT4 OBJECT-TYPE SYNTAX Unsigned32 (200..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the T4 timer for a SIP entity. T4 is the maximum duration a message will remain in the network. It represents the amount of time the network will take to clear messages between client and server transactions. It's used in various parts of the protocol to reset other Timer* objects to this value." REFERENCE "RFC 3261, Section 17" DEFVAL { 5000 } ::= { sipCommonCfgTimerEntry 14 } -- -- Common Statistics Objects -- -- -- Summary Statistics -- sipCommonSummaryStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonSummaryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the summary statistics objects applicable to all SIP entities. Each row represents those objects for a particular SIP entity present in this system." ::= { sipCommonSummaryStats 1 } sipCommonSummaryStatsEntry OBJECT-TYPE SYNTAX SipCommonSummaryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of summary statistics. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex } ::= { sipCommonSummaryStatsTable 1 } SipCommonSummaryStatsEntry ::= SEQUENCE { sipCommonSummaryInRequests Counter32, sipCommonSummaryOutRequests Counter32, sipCommonSummaryInResponses Counter32, sipCommonSummaryOutResponses Counter32, sipCommonSummaryTotalTransactions Counter32, sipCommonSummaryDisconTime TimeStamp } sipCommonSummaryInRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of SIP request messages received by the SIP entity, including retransmissions. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonSummaryDisconTime object in the same row." ::= { sipCommonSummaryStatsEntry 1 } sipCommonSummaryOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of SIP request messages sent out (originated and relayed) by the SIP entity. Where a particular message is sent more than once, for example as a retransmission or as a result of forking, each transmission is counted separately. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonSummaryDisconTime object in the same row." ::= { sipCommonSummaryStatsEntry 2 } sipCommonSummaryInResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of SIP response messages received by the SIP entity, including retransmissions. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonSummaryDisconTime object in the same row." ::= { sipCommonSummaryStatsEntry 3 } sipCommonSummaryOutResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of SIP response messages sent (originated and relayed) by the SIP entity including retransmissions. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonSummaryDisconTime object in the same row." ::= { sipCommonSummaryStatsEntry 4 } sipCommonSummaryTotalTransactions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a count of the number of transactions that are in progress and transactions that have reached the 'Terminated' state. It is not applicable to stateless SIP Proxy Servers. A SIP transaction occurs between a client and a server, and comprises all messages from the first request sent from the client to the server, up to a final (non-1xx) response sent from the server to the client. If the request is INVITE and the final response is a non-2xx, the transaction also include an ACK to the response. The ACK for a 2xx response to an INVITE request is a separate transaction. The branch ID parameter in the Via header field values serves as a transaction identifier. A transaction is identified by the CSeq sequence number within a single call leg. The ACK request has the same CSeq number as the corresponding INVITE request, but comprises a transaction of its own. In the case of a forked request, each branch counts as a single transaction. For a transaction stateless Proxy Server, this counter is always 0. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonSummaryDisconTime object in the same row." ::= { sipCommonSummaryStatsEntry 5 } sipCommonSummaryDisconTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object when the counters for the summary statistics objects in this row last experienced a discontinuity." ::= { sipCommonSummaryStatsEntry 6 } -- -- SIP Method Statistics -- Total counts for each SIP method. -- sipCommonMethodStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonMethodStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the method statistics objects for SIP entities. Each row represents those objects for a particular SIP entity present in this system." ::= { sipCommonMethodStats 1 } sipCommonMethodStatsEntry OBJECT-TYPE SYNTAX SipCommonMethodStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of per entity method statistics. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonMethodStatsName } ::= { sipCommonMethodStatsTable 1 } SipCommonMethodStatsEntry ::= SEQUENCE { sipCommonMethodStatsName SipTCMethodName, sipCommonMethodStatsOutbounds Counter32, sipCommonMethodStatsInbounds Counter32, sipCommonMethodStatsDisconTime TimeStamp } sipCommonMethodStatsName OBJECT-TYPE SYNTAX SipTCMethodName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the SIP method related to the objects in a particular row." ::= { sipCommonMethodStatsEntry 1 } sipCommonMethodStatsOutbounds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of requests sent by the SIP entity, excluding retransmissions. Retransmissions are counted separately and are not reflected in this counter. A Management Station can detect discontinuities in this counter by monitoring the sipCommonMethodStatsDisconTime object in the same row." REFERENCE "RFC 3261, Section 7.1" ::= { sipCommonMethodStatsEntry 2 } sipCommonMethodStatsInbounds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of requests received by the SIP entity. Retransmissions are counted separately and are not reflected in this counter. A Management Station can detect discontinuities in this counter by monitoring the sipCommonMethodStatsDisconTime object in the same row." REFERENCE "RFC 3261, Section 7.1" ::= { sipCommonMethodStatsEntry 3 } sipCommonMethodStatsDisconTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object when the counters for the method statistics objects in this row last experienced a discontinuity." ::= { sipCommonMethodStatsEntry 4 } -- -- Support for specific status codes -- sipCommonStatusCodeTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonStatusCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of SIP status codes that each SIP entity in this system has been requested to monitor. It is the mechanism by which specific status codes are monitored. Entries created in this table must not persist across reboots." ::= { sipCommonStatusCode 1 } sipCommonStatusCodeEntry OBJECT-TYPE SYNTAX SipCommonStatusCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular SIP status code that the SIP entity has been requested to monitor. Entries created in this table must not persist across reboots. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonStatusCodeMethod, sipCommonStatusCodeValue } ::= { sipCommonStatusCodeTable 1 } SipCommonStatusCodeEntry ::= SEQUENCE { sipCommonStatusCodeMethod SipTCMethodName, sipCommonStatusCodeValue Unsigned32, sipCommonStatusCodeIns Counter32, sipCommonStatusCodeOuts Counter32, sipCommonStatusCodeRowStatus RowStatus, sipCommonStatusCodeDisconTime TimeStamp } sipCommonStatusCodeMethod OBJECT-TYPE SYNTAX SipTCMethodName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a conceptual row in the table." ::= { sipCommonStatusCodeEntry 1 } sipCommonStatusCodeValue OBJECT-TYPE SYNTAX Unsigned32 (100..999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains a SIP status code value that the SIP entity has been requested to monitor. All of the other information in the row is related to this value." ::= { sipCommonStatusCodeEntry 2 } sipCommonStatusCodeIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of response messages received by the SIP entity with the status code value contained in the sipCommonStatusCodeValue column. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service, or when the monitoring of the status code is temporarily disabled. A Management Station can detect discontinuities in this counter by monitoring the sipCommonStatusCodeDisconTime object in the same row." ::= { sipCommonStatusCodeEntry 3 } sipCommonStatusCodeOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of response messages sent by the SIP entity with the status code value contained in the sipCommonStatusCodeValue column. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service, or when the monitoring of the Status code is temporarily disabled. A Management Station can detect discontinuities in this counter by monitoring the sipCommonStatusCodeDisconTime object in the same row." ::= { sipCommonStatusCodeEntry 4 } sipCommonStatusCodeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row augmentation in sipCommonStatusCodeNotifTable will be governed by the value of this RowStatus. The values 'createAndGo' and 'destroy' are the only valid values allowed for this object. If a row exists, it will reflect a status of 'active' when queried." ::= { sipCommonStatusCodeEntry 5 } sipCommonStatusCodeDisconTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object when the counters for the status code statistics objects in this row last experienced a discontinuity." ::= { sipCommonStatusCodeEntry 6 } -- -- Support for specific status code notifications -- sipCommonStatusCodeNotifTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonStatusCodeNotifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to control notifications related to particular status codes that each SIP entity in this system has been requested to monitor. There is an entry in this table corresponding to each entry in sipCommonStatusCodeTable. Therefore, this table augments sipCommonStatusCodeTable and utilizes the same index methodology. The objects in this table are not included directly in the sipCommonStatusCodeTable simply to keep the status code notification control objects separate from the actual status code statistics." ::= { sipCommonStatusCode 2 } sipCommonStatusCodeNotifEntry OBJECT-TYPE SYNTAX SipCommonStatusCodeNotifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information controlling notifications for a particular SIP status code that the SIP entity has been requested to monitor." AUGMENTS { sipCommonStatusCodeEntry } ::= { sipCommonStatusCodeNotifTable 1 } SipCommonStatusCodeNotifEntry ::= SEQUENCE { sipCommonStatusCodeNotifSend TruthValue, sipCommonStatusCodeNotifEmitMode INTEGER, sipCommonStatusCodeNotifThresh Unsigned32, sipCommonStatusCodeNotifInterval Unsigned32 } sipCommonStatusCodeNotifSend OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether a sipCommonStatusCodeNotif is emitted when the status code value specified by sipCommonStatusCodeValue is sent or received. If the value of this object is 'true', then a notification is sent. If it is 'false', no notification is sent. Note well that a notification MAY be emitted for every message sent or received that contains the particular status code. Depending on the status code involved, this can cause a significant number of notification emissions that could be detrimental to network performance. Managers are forewarned to be prudent in the use of this object to enable notifications. Look to sipCommonStatusCodeNotifEmitMode for alternative controls for sipCommonStatusCodeNotif emissions." DEFVAL { false } ::= { sipCommonStatusCodeNotifEntry 1 } sipCommonStatusCodeNotifEmitMode OBJECT-TYPE SYNTAX INTEGER { normal(1), oneShot(2), triggered(3) -- read-only } MAX-ACCESS read-write STATUS current DESCRIPTION "The object sipCommonStatusCodeNotifSend MUST be set to 'true' for the values of this object to have any effect. It is RECOMMENDED that the desired emit mode be established by this object prior to setting sipCommonStatusCodeNotifSend to 'true'. This object and the sipCommonStatusCodeNotifSend object can obviously be set independently, but their respective values will have a dependency on each other and the resulting notifications. This object specifies the mode for emissions of sipCommonStatusCodeNotif notifications. normal : sipCommonStatusCodeNotif notifications will be emitted by the system for each SIP response message sent or received that contains the desired status code. oneShot : Only one sipCommonStatusCodeNotif notification will be emitted. It will be the next SIP response message sent or received that contains the desired status code. No more notifications are emitted until this object is set to 'oneShot' again or set to 'normal'. This option is provided as a means of quelling the potential promiscuous behavior that can be associated with the sipCommonStatusCodeNotif. triggered : This value is only readable and cannot be set. It reflects that the 'oneShot' case has occurred, and indicates that the mode needs to be reset to get further notifications. The mode is reset by setting this object to 'oneShot' or 'normal'." DEFVAL { oneShot } ::= { sipCommonStatusCodeNotifEntry 2 } sipCommonStatusCodeNotifThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of response messages sent or received by this system that are considered excessive. Based on crossing that threshold, a sipCommonStatusCodeThreshExceededInNotif notification or a sipCommonStatusCodeThreshExceededOutNotif will be sent. The sipCommonStatusCodeThreshExceededInNotif and sipCommonStatusCodeThreshExceededOutNotif notifications can be used as an early warning mechanism in lieu of using sipCommonStatusCodeNotif. Note that the configuration applied by this object will be applied equally to inbound and outbound response messages." DEFVAL { 500 } ::= { sipCommonStatusCodeNotifEntry 3 } sipCommonStatusCodeNotifInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the time interval over which, if sipCommonStatusCodeThresh is exceeded with respect to sent or received messages, a sipCommonStatusCodeThreshExceededInNotif or sipCommonStatusCodeThreshExceededOutNotif notification will be sent. Note that the configuration applied by this object will be applied equally to inbound and outbound response messages." DEFVAL { 60 } ::= { sipCommonStatusCodeNotifEntry 4 } -- -- Transaction Statistics -- sipCommonTransCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonTransCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the transactions currently awaiting definitive responses by each SIP entity in this system. This table does not apply to transaction stateless Proxy Servers." ::= { sipCommonStatsTrans 1 } sipCommonTransCurrentEntry OBJECT-TYPE SYNTAX SipCommonTransCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a particular SIP entity's current transactions. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex } ::= { sipCommonTransCurrentTable 1 } SipCommonTransCurrentEntry ::= SEQUENCE { sipCommonTransCurrentactions Gauge32 } sipCommonTransCurrentactions OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of transactions awaiting definitive (non-1xx) response. In the case of a forked request, each branch counts as a single transaction corresponding to the entity identified by applIndex." ::= { sipCommonTransCurrentEntry 1 } -- -- SIP Retry Statistics -- -- This group contains various statistics objects about -- retransmission counts. -- sipCommonStatsRetryTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonStatsRetryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains retry statistics objects applicable to each SIP entity in this system." ::= { sipCommonStatsRetry 1 } sipCommonStatsRetryEntry OBJECT-TYPE SYNTAX SipCommonStatsRetryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of retry statistics. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex, sipCommonStatsRetryMethod } ::= { sipCommonStatsRetryTable 1 } SipCommonStatsRetryEntry ::= SEQUENCE { sipCommonStatsRetryMethod SipTCMethodName, sipCommonStatsRetries Counter32, sipCommonStatsRetryFinalResponses Counter32, sipCommonStatsRetryNonFinalResponses Counter32, sipCommonStatsRetryDisconTime TimeStamp } sipCommonStatsRetryMethod OBJECT-TYPE SYNTAX SipTCMethodName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the SIP method related to the objects in a row." ::= { sipCommonStatsRetryEntry 1 } sipCommonStatsRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of request retransmissions that have been sent by the SIP entity. Note that there could be multiple retransmissions per request. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonStatsRetryDisconTime object in the same row." ::= { sipCommonStatsRetryEntry 2 } sipCommonStatsRetryFinalResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of Final Response retries that have been sent by the SIP entity. Note that there could be multiple retransmissions per request. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonStatsRetryDisconTime object in the same row." ::= { sipCommonStatsRetryEntry 3 } sipCommonStatsRetryNonFinalResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the total number of non-Final Response retries that have been sent by the SIP entity. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonStatsRetryDisconTime object in the same row." ::= { sipCommonStatsRetryEntry 4 } sipCommonStatsRetryDisconTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object when the counters for the retry statistics objects in this row last experienced a discontinuity." ::= { sipCommonStatsRetryEntry 5 } -- -- Other Common Statistics -- sipCommonOtherStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SipCommonOtherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains other common statistics supported by each SIP entity in this system." ::= { sipCommonOtherStats 1 } sipCommonOtherStatsEntry OBJECT-TYPE SYNTAX SipCommonOtherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a particular SIP entity's other common statistics. Each row represents those objects for a particular SIP entity present in this system. applIndex is used to uniquely identify these instances of SIP entities and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788)." INDEX { applIndex } ::= { sipCommonOtherStatsTable 1 } SipCommonOtherStatsEntry ::= SEQUENCE { sipCommonOtherStatsNumUnsupportedUris Counter32, sipCommonOtherStatsNumUnsupportedMethods Counter32, sipCommonOtherStatsOtherwiseDiscardedMsgs Counter32, sipCommonOtherStatsDisconTime TimeStamp } sipCommonOtherStatsNumUnsupportedUris OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RequestURIs received with an unsupported scheme. A server normally responds to such requests with a 400 Bad Request status code. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonOtherStatsDisconTime object in the same row." ::= { sipCommonOtherStatsEntry 1 } sipCommonOtherStatsNumUnsupportedMethods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SIP requests received with unsupported methods. A server normally responds to such requests with a 501 (Not Implemented) or 405 (Method Not Allowed). Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonOtherStatsDisconTime object in the same row." ::= { sipCommonOtherStatsEntry 2 } sipCommonOtherStatsOtherwiseDiscardedMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SIP messages received that, for any number of reasons, was discarded without a response. Discontinuities in the value of this counter can occur at re-initialization of the SIP entity or service. A Management Station can detect discontinuities in this counter by monitoring the sipCommonOtherStatsDisconTime object in the same row." ::= { sipCommonOtherStatsEntry 3 } sipCommonOtherStatsDisconTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object when the counters for the statistics objects in this row last experienced a discontinuity." ::= { sipCommonOtherStatsEntry 4 } -- -- Notification related objects -- -- -- Status code related notification objects. -- sipCommonStatusCodeNotifTo OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the value of the To header in the message containing the status code that caused the notification. The header name will be part of this object value. For example, 'To: Watson '." ::= { sipCommonNotifObjects 1 } sipCommonStatusCodeNotifFrom OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the value of the From header in the message containing the status code that caused the notification. The header name will be part of this object value. For example, 'From: Watson '." ::= { sipCommonNotifObjects 2 } sipCommonStatusCodeNotifCallId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the value of the Call-ID in the message containing the status code that caused the notification. The header name will be part of this object value. For example, 'Call-ID: 5551212@example.com'." ::= { sipCommonNotifObjects 3 } sipCommonStatusCodeNotifCSeq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the CSeq value in the message containing the status code that caused the notification. The header name will be part of this object value. For example, 'CSeq: 1722 INVITE'." ::= { sipCommonNotifObjects 4 } -- -- General notification related objects. -- sipCommonNotifApplIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the applIndex as described in RFC 2788. This object is created in order to allow a variable binding containing a value of applIndex in a notification." ::= { sipCommonNotifObjects 5 } sipCommonNotifSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains a sequence number for each notification generated by this SIP entity. Each notification SHOULD have a unique sequence number. A network manager can use this information to determine whether notifications from a particular SIP entity have been missed. The value of this object MUST start at 1 and increase by 1 with each generated notification. If a system restarts, the sequence number MAY start again from 1." ::= { sipCommonNotifObjects 6 } -- -- Notifications -- sipCommonStatusCodeNotif NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonStatusCodeNotifTo, sipCommonStatusCodeNotifFrom, sipCommonStatusCodeNotifCallId, sipCommonStatusCodeNotifCSeq, sipCommonStatusCodeIns, sipCommonStatusCodeOuts } STATUS current DESCRIPTION "Signifies that a specific status code has been sent or received by the system." ::= { sipCommonMIBNotifications 1 } sipCommonStatusCodeThreshExceededInNotif NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonStatusCodeIns } STATUS current DESCRIPTION "Signifies that a specific status code was found to have been received by the system frequently enough to exceed the configured threshold. This notification can be used as an early warning mechanism in lieu of using sipCommonStatusCodeNotif." ::= { sipCommonMIBNotifications 2 } sipCommonStatusCodeThreshExceededOutNotif NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonStatusCodeOuts } STATUS current DESCRIPTION "Signifies that a specific status code was found to have been sent by the system enough to exceed the configured threshold. This notification can be used as an early warning mechanism in lieu of using sipCommonStatusCodeNotif." ::= { sipCommonMIBNotifications 3 } sipCommonServiceColdStart NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonCfgServiceStartTime } STATUS current DESCRIPTION "Signifies that the SIP service has reinitialized itself or started for the first time. This SHOULD result from a hard 'down' to 'up' administrative status change. The configuration or behavior of the service MAY be altered." ::= { sipCommonMIBNotifications 4 } sipCommonServiceWarmStart NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonCfgServiceLastChange } STATUS current DESCRIPTION "Signifies that the SIP service has reinitialized itself and is restarting after an administrative 'reset'. The configuration or behavior of the service MAY be altered." ::= { sipCommonMIBNotifications 5 } sipCommonServiceStatusChanged NOTIFICATION-TYPE OBJECTS { sipCommonNotifSequenceNumber, sipCommonNotifApplIndex, sipCommonCfgServiceLastChange, sipCommonCfgServiceOperStatus } STATUS current DESCRIPTION "Signifies that the SIP service operational status has changed." ::= { sipCommonMIBNotifications 6 } -- -- Conformance -- sipCommonMIBCompliances OBJECT IDENTIFIER ::= { sipCommonMIBConformance 1 } sipCommonMIBGroups OBJECT IDENTIFIER ::= { sipCommonMIBConformance 2 } -- -- Compliance Statements -- sipCommonCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SIP entities." MODULE -- this module MANDATORY-GROUPS { sipCommonConfigGroup, sipCommonStatsGroup } OBJECT sipCommonStatusCodeRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT sipCommonCfgServiceNotifEnable MIN-ACCESS not-accessible DESCRIPTION "This object is optional and does not need to be supported." GROUP sipCommonInformationalGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any support for these objects, as they provide optional information." GROUP sipCommonConfigTimerGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any timer configuration." GROUP sipCommonStatsRetryGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any retry statistics." GROUP sipCommonNotifGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any notifications. If implemented, the sipCommonStatusCodeNotifGroup and sipCommonNotifObjectsGroup MUST also be implemented." GROUP sipCommonStatusCodeNotifGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any notifications. If implemented, the sipCommonNotifGroup and sipCommonNotifObjectsGroup MUST also be implemented." GROUP sipCommonNotifObjectsGroup DESCRIPTION "This group is OPTIONAL. A SIP entity can elect to not provide any notifications. If implemented, the sipCommonStatusCodeNotifGroup and sipCommonNotifGroup MUST also be implemented." ::= { sipCommonMIBCompliances 1 } -- -- Units of Conformance -- sipCommonConfigGroup OBJECT-GROUP OBJECTS { sipCommonCfgProtocolVersion, sipCommonCfgServiceOperStatus, sipCommonCfgServiceStartTime, sipCommonCfgServiceLastChange, sipCommonPortTransportRcv, sipCommonOptionTag, sipCommonOptionTagHeaderField, sipCommonCfgMaxTransactions, sipCommonCfgServiceNotifEnable, sipCommonCfgEntityType, sipCommonMethodSupportedName } STATUS current DESCRIPTION "A collection of objects providing configuration common to all SIP entities." ::= { sipCommonMIBGroups 1 } sipCommonInformationalGroup OBJECT-GROUP OBJECTS { sipCommonCfgOrganization } STATUS current DESCRIPTION "A collection of objects providing configuration common to all SIP entities." ::= { sipCommonMIBGroups 2 } sipCommonConfigTimerGroup OBJECT-GROUP OBJECTS { sipCommonCfgTimerA, sipCommonCfgTimerB, sipCommonCfgTimerC, sipCommonCfgTimerD, sipCommonCfgTimerE, sipCommonCfgTimerF, sipCommonCfgTimerG, sipCommonCfgTimerH, sipCommonCfgTimerI, sipCommonCfgTimerJ, sipCommonCfgTimerK, sipCommonCfgTimerT1, sipCommonCfgTimerT2, sipCommonCfgTimerT4 } STATUS current DESCRIPTION "A collection of objects providing timer configuration common to all SIP entities." ::= { sipCommonMIBGroups 3 } sipCommonStatsGroup OBJECT-GROUP OBJECTS { sipCommonSummaryInRequests, sipCommonSummaryOutRequests, sipCommonSummaryInResponses, sipCommonSummaryOutResponses, sipCommonSummaryTotalTransactions, sipCommonSummaryDisconTime, sipCommonMethodStatsOutbounds, sipCommonMethodStatsInbounds, sipCommonMethodStatsDisconTime, sipCommonStatusCodeIns, sipCommonStatusCodeOuts, sipCommonStatusCodeRowStatus, sipCommonStatusCodeDisconTime, sipCommonTransCurrentactions, sipCommonOtherStatsNumUnsupportedUris, sipCommonOtherStatsNumUnsupportedMethods, sipCommonOtherStatsOtherwiseDiscardedMsgs, sipCommonOtherStatsDisconTime } STATUS current DESCRIPTION "A collection of objects providing statistics common to all SIP entities." ::= { sipCommonMIBGroups 4 } sipCommonStatsRetryGroup OBJECT-GROUP OBJECTS { sipCommonStatsRetries, sipCommonStatsRetryFinalResponses, sipCommonStatsRetryNonFinalResponses, sipCommonStatsRetryDisconTime } STATUS current DESCRIPTION "A collection of objects providing retry statistics." ::= { sipCommonMIBGroups 5 } sipCommonNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { sipCommonStatusCodeNotif, sipCommonStatusCodeThreshExceededInNotif, sipCommonStatusCodeThreshExceededOutNotif, sipCommonServiceColdStart, sipCommonServiceWarmStart, sipCommonServiceStatusChanged } STATUS current DESCRIPTION "A collection of notifications common to all SIP entities." ::= { sipCommonMIBGroups 6 } sipCommonStatusCodeNotifGroup OBJECT-GROUP OBJECTS { sipCommonStatusCodeNotifSend, sipCommonStatusCodeNotifEmitMode, sipCommonStatusCodeNotifThresh, sipCommonStatusCodeNotifInterval } STATUS current DESCRIPTION "A collection of objects related to the control and attribution of notifications common to all SIP entities." ::= { sipCommonMIBGroups 7 } sipCommonNotifObjectsGroup OBJECT-GROUP OBJECTS { sipCommonStatusCodeNotifTo, sipCommonStatusCodeNotifFrom, sipCommonStatusCodeNotifCallId, sipCommonStatusCodeNotifCSeq, sipCommonNotifApplIndex, sipCommonNotifSequenceNumber } STATUS current DESCRIPTION "A collection of accessible-for-notify objects related to the notification defined in this MIB module." ::= { sipCommonMIBGroups 8 } END