ROHC-UNCOMPRESSED-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, mib-2
        FROM SNMPv2-SMI                               -- [RFC2578]
 
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF                              -- [RFC2580]
 
    rohcChannelID, rohcContextCID
        FROM ROHC-MIB;
 
 
 
rohcUncmprMIB MODULE-IDENTITY
    LAST-UPDATED "200406030000Z"  -- June 3, 2004
    ORGANIZATION "IETF Robust Header Compression Working Group"
    CONTACT-INFO
       "WG charter:
          http://www.ietf.org/html.charters/rohc-charter.html
 
        Mailing Lists:
          General Discussion: rohc@ietf.org
          To Subscribe: rohc-request@ietf.org
          In Body: subscribe your_email_address
 
        Editor:
          Juergen Quittek
          NEC Europe Ltd.
          Network Laboratories
          Kurfuersten-Anlage 36
          69221 Heidelberg
          Germany
          Tel: +49 6221 90511-15
          EMail: quittek@netlab.nec.de"
    DESCRIPTION
        "This MIB module defines a set of objects for monitoring
         and configuring RObust Header Compression (ROHC).
         The objects are specific to ROHC uncompressed
         (profile 0x0000).
 
         Copyright (C) The Internet Society (2004). The
         initial version of this MIB module was published
         in RFC 3816. For full legal notices see the RFC
         itself or see:
         http://www.ietf.org/copyrights/ianamib.html"
 
    REVISION    "200406030000Z"  -- June 3, 2004
    DESCRIPTION "Initial version, published as RFC 3816."
    ::= { mib-2 113 }
 
--
-- The groups defined within this MIB module:
--
 
rohcUncmprObjects       OBJECT IDENTIFIER ::= { rohcUncmprMIB 1 }
rohcUncmprConformance   OBJECT IDENTIFIER ::= { rohcUncmprMIB 2 }
 
--
-- Context Table
--
-- The rohcUncmprContextTable lists all contexts per interface
 
 
-- and instance.  It extends the rohcContextTable.
--
 
rohcUncmprContextTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RohcUncmprContextEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table lists and describes ROHC uncompressed profile
         specific properties of compressor contexts and
         decompressor contexts.  It extends the rohcContextTable
         of the ROHC-MIB module."
    ::= { rohcUncmprObjects 1 }
 
rohcUncmprContextEntry OBJECT-TYPE
    SYNTAX      RohcUncmprContextEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry describing a particular context."
    INDEX {
        rohcChannelID,
        rohcContextCID
    }
    ::= { rohcUncmprContextTable 1 }
 
RohcUncmprContextEntry ::= SEQUENCE {
    rohcUncmprContextState         INTEGER,
    rohcUncmprContextMode          INTEGER,
    rohcUncmprContextACKs          Counter32
}
 
rohcUncmprContextState OBJECT-TYPE
    SYNTAX      INTEGER {
                    initAndRefresh(1),
                    normal(2),
                    noContext(3),
                    fullContext(4)
                }
 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "State of the context. States initAndRefresh(1) and normal(2)
         are states of compressor contexts, states noContext(3)
         and fullContext(4) are states of decompressor contexts."
    REFERENCE
        "RFC 3095, Section 5.10.3"
 
 
 
    ::= { rohcUncmprContextEntry 3 }
 
rohcUncmprContextMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    unidirectional(1),
                    bidirectional(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Mode of the context."
    REFERENCE
        "RFC 3095, Section 5.10.3"
    ::= { rohcUncmprContextEntry 4 }
 
rohcUncmprContextACKs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of all positive feedbacks (ACK) sent or
         received in this context, respectively.
 
         Discontinuities in the value of this counter can
         occur at re-initialization of the management
         system, and at other times as indicated by the
         value of ifCounterDiscontinuityTime.  For checking
         ifCounterDiscontinuityTime, the interface index is
         required.  It can be determined by reading the
         rohcChannelTable of the ROHC-MIB."
    REFERENCE
        "RFC 3095, Section 5.2.1"
    ::= { rohcUncmprContextEntry 5 }
 
--
-- conformance information
--
 
rohcUncmprCompliances OBJECT IDENTIFIER
    ::= { rohcUncmprConformance 1 }
rohcUncmprGroups      OBJECT IDENTIFIER
    ::= { rohcUncmprConformance 2 }
 
--
-- compliance statements
--
 
rohcUncmprCompliance MODULE-COMPLIANCE
 
 
    STATUS      current
    DESCRIPTION
        "The compliance statement for SNMP entities that implement
         the ROHC-UNCOMPRESSED-MIB.
 
         Note that compliance with this compliance
         statement requires compliance with the
         rohcCompliance MODULE-COMPLIANCE statement of the
         ROHC-MIB and with the ifCompliance3 MODULE-COMPLIANCE
         statement of the IF-MIB (RFC2863)."
    MODULE      -- this module
    MANDATORY-GROUPS {
            rohcUncmprContextGroup
    }
    GROUP   rohcUncmprStatisticsGroup
    DESCRIPTION
       "A compliant implementation does not have to implement
        the rohcUncmprStatisticsGroup."
    ::= { rohcUncmprCompliances 1 }
 
rohcUncmprContextGroup OBJECT-GROUP
    OBJECTS {
        rohcUncmprContextState,
        rohcUncmprContextMode
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing information about
         ROHC uncompressed compressors and decompressors."
    ::= { rohcUncmprGroups 1 }
 
rohcUncmprStatisticsGroup OBJECT-GROUP
    OBJECTS {
        rohcUncmprContextACKs
    }
    STATUS      current
    DESCRIPTION
        "An object providing context statistics."
    ::= { rohcUncmprGroups 2 }
 
END