CLNS-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
        experimental, Counter
                FROM RFC1155-SMI
        PhysAddress
                FROM RFC1213-MIB
        OBJECT-TYPE
                FROM RFC-1212;
 
--  This MIB module uses the extended OBJECT-TYPE macro as
--  defined in [9]
 
 
--  the CLNS MIB module
 
clns    OBJECT IDENTIFIER ::= { experimental 1 }
 
 
-- textual conventions
 
ClnpAddress ::=
        OCTET STRING (SIZE (1..21))
-- This data type is used to model NSAP addresses.
 
 
-- groups in the CLNS MIB
 
clnp    OBJECT IDENTIFIER ::=   { clns 1 }
 
error   OBJECT IDENTIFIER ::=   { clns 2 }
 
echo    OBJECT IDENTIFIER ::=   { clns 3 }
 
es-is   OBJECT IDENTIFIER ::=   { clns 4 }
 
 
-- the CLNP group
 
-- Implementation of this group is recommended for all
-- systems which implement the CLNP.
 
clnpForwarding OBJECT-TYPE
    SYNTAX  INTEGER {
                is(1),   -- entity is an intermediate system
 
                         -- entity is an end system and does
                es(2)   -- not forward PDUs
            }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The indication of whether this entity is active
            as an intermediate or end system.  Only
            intermediate systems will forward PDUs onward that
            are not addressed to them."
     ::= { clnp 1 }
 
clnpDefaultLifeTime OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The default value inserted into the Lifetime
            field of the CLNP PDU header of PDUs sourced by
            this entity."
    ::= { clnp 2 }
 
clnpInReceives OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The total number of input PDUs received from all
            connected network interfaces running CLNP,
            including errors."
    ::= { clnp 3 }
 
clnpInHdrErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of input PDUs discarded due to errors
            in the CLNP header, including bad checksums,
            version mismatch, lifetime exceeded, errors
            discovered in processing options, etc."
    ::= { clnp 4 }
 
clnpInAddrErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of input PDUs discarded because the
            NSAP address in the CLNP header's destination
            field was not a valid NSAP to be received at this
            entity.  This count includes addresses not
            understood.  For end systems, this is a count of
            PDUs which arrived with a destination NSAP which
            was not local."
    ::= { clnp 5 }
 
clnpForwPDUs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of input PDUs for which this entity
            was not the final destination and which an attempt
            was made to forward them onward."
    ::= { clnp 6 }
 
clnpInUnknownNLPs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of locally-addressed PDUs successfully
            received but discarded because the network layer
            protocol was unknown or unsupported (e.g., not
            CLNP or ES-IS)."
    ::= { clnp 7 }
 
clnpInUnknownULPs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of locally-addressed PDUs successfully
            received but discarded because the upper layer
            protocol was unknown or unsupported (e.g., not
            TP4)."
    ::= { clnp 8 }
 
clnpInDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of input CLNP PDUs for which no
            problems were encountered to prevent their
            continued processing, but were discarded (e.g.,
            for lack of buffer space).  Note that this counter
            does not include any PDUs discarded while awaiting
            re-assembly."
    ::= { clnp 9 }
 
clnpInDelivers OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The total number of input PDUs successfully
            delivered to the CLNS transport user."
    ::= { clnp 10 }
 
clnpOutRequests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The total number of CLNP PDUs which local CLNS
            user protocols supplied to CLNP for transmission
            requests.  This counter does not include any PDUs
            counted in clnpForwPDUs."
    ::= { clnp 11 }
 
clnpOutDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of output CLNP PDUs for which no other
            problem was encountered to prevent their
            transmission but were discarded (e.g., for lack of
            buffer space).  Note this counter includes PDUs
            counted in clnpForwPDUs."
    ::= { clnp 12 }
 
clnpOutNoRoutes OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDUs discarded because no
            route could be found to transmit them to their
            destination.  This counter includes any PDUs
            counted in clnpForwPDUs."
    ::= { clnp 13 }
 
clnpReasmTimeout OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The maximum number of seconds which received
            segments are held while they are awaiting
            reassembly at this entity."
    ::= { clnp 14 }
 
clnpReasmReqds OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP segments received which needed
            to be reassembled at this entity."
    ::= { clnp 15 }
 
clnpReasmOKs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDUs successfully re-assembled
            at this entity."
    ::= { clnp 16 }
 
clnpReasmFails OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of failures detected by the CLNP
            reassembly algorithm (for any reason: timed out,
            buffer size, etc)."
    ::= { clnp 17 }
 
clnpSegOKs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDUs that have been
            successfully segmented at this entity."
    ::= { clnp 18 }
 
clnpSegFails OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDUs that have been discarded
            because they needed to be fragmented at this
            entity but could not."
    ::= { clnp 19 }
 
clnpSegCreates OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDU segments that have been
            generated as a result of segmentation at this
            entity."
    ::= { clnp 20 }
 
clnpInOpts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDU segments that have been
            input with options at this entity."
    ::= { clnp 25 }
 
clnpOutOpts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP PDU segments that have been
            generated with options by this entity."
    ::= { clnp 26 }
 
clnpRoutingDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of routing entries which were chosen
            to be discarded even though they are valid.  One
            possible reason for discarding such an entry could
            be to free-up buffer space for other routing
            entries."
    ::= { clnp 27 }
 
 
-- the CLNP Interfaces table
 
-- The CLNP interfaces table contains information on the
-- entity's interfaces which are running the CLNP.
 
clnpAddrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF ClnpAddrEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The table of addressing information relevant to
            this entity's CLNP addresses.  "
    ::= { clnp 21 }
 
clnpAddrEntry OBJECT-TYPE
    SYNTAX  ClnpAddrEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The addressing information for one of this
            entity's CLNP addresses."
    INDEX   { clnpAdEntAddr }
    ::= { clnpAddrTable 1 }
 
ClnpAddrEntry ::=
    SEQUENCE {
        clnpAdEntAddr
            ClnpAddress,
        clnpAdEntIfIndex
            INTEGER,
        clnpAdEntReasmMaxSize
            INTEGER (0..65535)
    }
 
clnpAdEntAddr OBJECT-TYPE
    SYNTAX  ClnpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The CLNP address to which this entry's addressing
            information pertains."
    ::= { clnpAddrEntry 1 }
 
clnpAdEntIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The index value which uniquely identifies the
            interface to which this entry is applicable.  The
            interface identified by a particular value of this
            index is the same interface as identified by the
            same value of ifIndex."
    ::= { clnpAddrEntry 2 }
 
clnpAdEntReasmMaxSize OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The size of the largest CLNP PDU which this
            entity can re-assemble from incoming CLNP
            segmented PDUs received on this interface."
    ::= { clnpAddrEntry 3 }
 
 
-- The CLNP Routing table
 
-- The CLNP routing table contains an entry for each route
-- known to the entity.
 
clnpRoutingTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF ClnpRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "This entity's CLNP routing table."
    ::= { clnp 22 }
 
clnpRouteEntry OBJECT-TYPE
    SYNTAX  ClnpRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A route to a particular destination."
    INDEX   { clnpRouteDest }
    ::= { clnpRoutingTable 1 }
 
ClnpRouteEntry ::=
    SEQUENCE {
        clnpRouteDest
            ClnpAddress,
        clnpRouteIfIndex
            INTEGER,
        clnpRouteMetric1
            INTEGER,
        clnpRouteMetric2
            INTEGER,
        clnpRouteMetric3
            INTEGER,
        clnpRouteMetric4
            INTEGER,
        clnpRouteNextHop
            ClnpAddress,
        clnpRouteType
            INTEGER,
        clnpRouteProto
            INTEGER,
        clnpRouteAge
            INTEGER,
        clnpRouteMetric5
            INTEGER,
        clnpRouteInfo
            OBJECT IDENTIFIER
    }
 
clnpRouteDest OBJECT-TYPE
    SYNTAX  ClnpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The destination CLNP address of this route."
    ::= { clnpRouteEntry 1 }
 
clnpRouteIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The index value which uniquely identifies the
            local interface through which the next hop of this
            route should be reached.  The interface identified
            by a particular value of this index is the same as
            identified by the same value of ifIndex."
    ::= { clnpRouteEntry 2 }
 
clnpRouteMetric1 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The primary routing metric for this route.  The
            semantics of this metric are determined by the
            routing-protocol specified in the route's
            clnpRouteProto value.  If this metric is not used,
            its value should be set to -1."
    ::= { clnpRouteEntry 3 }
 
clnpRouteMetric2 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "An alternate routing metric for this route.  The
            semantics of this metric are determined by the
            routing-protocol specified in the route's
            clnpRouteProto value.  If this metric is not used,
            its value should be set to -1."
    ::= { clnpRouteEntry 4 }
 
clnpRouteMetric3 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "An alternate routing metric for this route.  The
            semantics of this metric are determined by the
            routing-protocol specified in the route's
            clnpRouteProto value.  If this metric is not used,
            its value should be set to -1."
    ::= { clnpRouteEntry 5 }
 
clnpRouteMetric4 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "An alternate routing metric for this route.  The
            semantics of this metric are determined by the
            routing-protocol specified in the route's
            clnpRouteProto value.  If this metric is not used,
            its value should be set to -1."
    ::= { clnpRouteEntry 6 }
 
clnpRouteNextHop OBJECT-TYPE
    SYNTAX  ClnpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The CLNP address of the next hop of this route."
    ::= { clnpRouteEntry 7 }
 
clnpRouteType OBJECT-TYPE
    SYNTAX  INTEGER {
                other(1),      -- none of the following
 
                invalid(2),    -- an invalidated route
 
                               -- route to directly
                direct(3),     -- connected (sub-)network
 
                               -- route to a non-local
                remote(4)      -- host/network/sub-network
            }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The type of route.
 
            Setting this object to the value invalid(2) has
            the effect of invaliding the corresponding entry
            in the clnpRoutingTable.  That is, it effectively
            dissasociates the destination identified with said
            entry from the route identified with said entry.
            It is an implementation-specific matter as to
            whether the agent removes an invalidated entry
            from the table.  Accordingly, management stations
            must be prepared to receive tabular information
            from agents that corresponds to entries not
            currently in use.  Proper interpretation of such
            entries requires examination of the relevant
            clnpRouteType object."
    ::= { clnpRouteEntry 8 }
 
clnpRouteProto OBJECT-TYPE
    SYNTAX  INTEGER {
                other(1),     -- none of the following
 
                              -- non-protocol information
                              --   e.g., manually
                local(2),     --   configured entries
 
                              -- set via a network
                netmgmt(3),   --   management protocol
 
                              -- similar to ipRouteProto but
                              -- omits several IP-specific
                              -- protocols
 
                is-is(9),
                ciscoIgrp(11),
                bbnSpfIgp(12),
                ospf(13),
                bgp(14)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The routing mechanism via which this route was
            learned.  Inclusion of values for gateway routing
            protocols is not intended to imply that hosts
            should support those protocols."
    ::= { clnpRouteEntry 9 }
 
clnpRouteAge OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The number of seconds since this route was last
            updated or otherwise determined to be correct.
            Note that no semantics of `too old' can be implied
            except through knowledge of the routing protocol
            by which the route was learned."
    ::= { clnpRouteEntry 10 }
 
clnpRouteMetric5 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "An alternate routing metric for this route.  The
            semantics of this metric are determined by the
            routing-protocol specified in the route's
            clnpRouteProto value.  If this metric is not used,
            its value should be set to -1."
    ::= { clnpRouteEntry 11 }
 
clnpRouteInfo OBJECT-TYPE
    SYNTAX  OBJECT IDENTIFIER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A reference to MIB definitions specific to the
            particular routing protocol which is responsible
            for this route, as determined by the value
            specified in the route's clnpRouteProto value.  If
            this information is not present, its value should
            be set to the OBJECT IDENTIFIER { 0 0 }, which is
            a syntatically valid object identifier, and any
            conformant implementation of ASN.1 and BER must be
            able to generate and recognize this value."
    ::= { clnpRouteEntry 12 }
 
 
-- the CLNP Address Translation table
 
-- The Address Translation tables contain the CLNP address
-- to physical address equivalences.  Some interfaces do not
-- use translation tables for determining address
-- equivalences; if all interfaces are of this type, then the
-- Address Translation table is empty, i.e., has zero
-- entries.
 
clnpNetToMediaTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF ClnpNetToMediaEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The CLNP Address Translation table used for
            mapping from CLNP addresses to physical
            addresses."
    ::= { clnp 23 }
 
clnpNetToMediaEntry OBJECT-TYPE
    SYNTAX  ClnpNetToMediaEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "Each entry contains one CLNP address to
            `physical' address equivalence."
    INDEX   { clnpNetToMediaIfIndex, clnpNetToMediaNetAddress }
    ::= { clnpNetToMediaTable 1 }
 
ClnpNetToMediaEntry ::=
    SEQUENCE {
        clnpNetToMediaIfIndex
            INTEGER,
        clnpNetToMediaPhysAddress
            PhysAddress,
        clnpNetToMediaNetAddress
            ClnpAddress,
        clnpNetToMediaType
            INTEGER,
        clnpNetToMediaAge
            INTEGER,
        clnpNetToMediaHoldTime
            INTEGER
    }
 
clnpNetToMediaIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The interface on which this entry's equivalence
            is effective.  The interface identified by a
            particular value of this index is the same
            interface as identified by the same value of
            ifIndex."
    ::= { clnpNetToMediaEntry 1 }
 
clnpNetToMediaPhysAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The media-dependent `physical' address."
    ::= { clnpNetToMediaEntry 2 }
 
clnpNetToMediaNetAddress OBJECT-TYPE
    SYNTAX  ClnpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The CLNP address corresponding to the media-
            dependent `physical' address."
    ::= { clnpNetToMediaEntry 3 }
 
clnpNetToMediaType OBJECT-TYPE
    SYNTAX  INTEGER {
                other(1),       -- none of the following
                invalid(2),     -- an invalidated mapping
                dynamic(3),
                static(4)
            }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The type of mapping.
 
            Setting this object to the value invalid(2) has
            the effect of invalidating the corresponding entry
            in the clnpNetToMediaTable.  That is, it
            effectively dissassociates the interface
            identified with said entry from the mapping
            identified with said entry.  It is an
            implementation-specific matter as to whether the
            agent removes an invalidated entry from the table.
            Accordingly, management stations must be prepared
            to receive tabular information from agents that
            corresponds to entries not currently in use.
            Proper interpretation of such entries requires
            examination of the relevant clnpNetToMediaType
            object."
    ::= { clnpNetToMediaEntry 4 }
 
clnpNetToMediaAge OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The number of seconds since this entry was last
            updated or otherwise determined to be correct.
            Note that no semantics of `too old' can be implied
            except through knowledge of the type of entry."
    ::= { clnpNetToMediaEntry 5 }
 
clnpNetToMediaHoldTime OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The time in seconds this entry will be valid.
            Static entries should always report this field as
            -1."
    ::= { clnpNetToMediaEntry 6 }
 
clnpMediaToNetTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF ClnpMediaToNetEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The CLNP Address Translation table used for
            mapping from physical addresses to CLNP
            addresses."
    ::= { clnp 24 }
 
clnpMediaToNetEntry OBJECT-TYPE
    SYNTAX  ClnpMediaToNetEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "Each entry contains on ClnpAddress to `physical'
            address equivalence."
    INDEX   { clnpMediaToNetIfIndex, clnpMediaToNetPhysAddress }
    ::= { clnpMediaToNetTable 1 }
 
ClnpMediaToNetEntry ::=
    SEQUENCE {
        clnpMediaToNetIfIndex
            INTEGER,
        clnpMediaToNetAddress
            ClnpAddress,
        clnpMediaToNetPhysAddress
            PhysAddress,
        clnpMediaToNetType
            INTEGER,
        clnpMediaToNetAge
            INTEGER,
        clnpMediaToNetHoldTime
            INTEGER
    }
 
clnpMediaToNetIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The interface on which this entry's equivalence
            is effective.  The interface identified by a
            particular value of this index is the same
            interface as identified by the same value of
            ifIndex."
    ::= { clnpMediaToNetEntry 1 }
 
clnpMediaToNetAddress OBJECT-TYPE
    SYNTAX  ClnpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The ClnpAddress corresponding to the media-
            dependent `physical' address."
    ::= { clnpMediaToNetEntry 2 }
 
clnpMediaToNetPhysAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The media-dependent `physical' address."
    ::= { clnpMediaToNetEntry 3 }
 
clnpMediaToNetType OBJECT-TYPE
    SYNTAX  INTEGER {
                other(1),       -- none of the following
                invalid(2),     -- an invalidated mapping
                dynamic(3),
                static(4)
            }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The type of mapping.
 
            Setting this object to the value invalid(2) has
            the effect of invalidating the corresponding entry
            in the clnpMediaToNetTable.  That is, it
            effectively dissassociates the interface
            identified with said entry from the mapping
            identified with said entry.  It is an
            implementation-specific matter as to whether the
            agent removes an invalidated entry from the table.
            Accordingly, management stations must be prepared
            to receive tabular information from agents that
            corresponds to entries not currently in use.
            Proper interpretation of such entries requires
            examination of the relevant clnpMediaToNetType
            object."
    ::= { clnpMediaToNetEntry 4 }
 
clnpMediaToNetAge OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The number of seconds since this entry was last
            updated or otherwise determined to be correct.
            Note that no semantics of `too old' can be implied
            except through knowledge of the type of entry."
    ::= { clnpMediaToNetEntry 5 }
 
clnpMediaToNetHoldTime OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
            "The time in seconds this entry will be valid.
            Static entries should always report this field as
            -1."
    ::= { clnpMediaToNetEntry 6 }
 
 
-- the CLNP Error group
 
-- Implementation of this group is recommended for all
-- systems which implement the CLNP Error protocol.
 
clnpInErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP Error PDUs received by this
            entity."
    ::= { error 1 }
 
clnpOutErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of CLNP Error PDUs sent by this
            entity."
    ::= { error 2 }
 
clnpInErrUnspecs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unspecified CLNP Error PDUs
            received by this entity."
    ::= { error 3 }
 
clnpInErrProcs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of protocol procedure CLNP Error PDUs
            received by this entity."
    ::= { error 4 }
 
clnpInErrCksums OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of checksum CLNP Error PDUs received
            by this entity."
    ::= { error 5 }
 
clnpInErrCongests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of congestion drop CLNP Error PDUs
            received by this entity."
    ::= { error 6 }
 
clnpInErrHdrs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of header syntax CLNP Error PDUs
            received by this entity."
    ::= { error 7 }
 
clnpInErrSegs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of segmentation disallowed CLNP Error
            PDUs received by this entity."
    ::= { error 8 }
 
clnpInErrIncomps OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of incomplete PDU CLNP Error PDUs
            received by this entity."
    ::= { error 9 }
 
clnpInErrDups OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of duplicate option CLNP Error PDUs
            received by this entity."
    ::= { error 10 }
 
clnpInErrUnreachDsts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unreachable destination CLNP Error
            PDUs received by this entity."
    ::= { error 11 }
 
clnpInErrUnknownDsts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unknown destination CLNP Error PDUs
            received by this entity."
    ::= { error 12 }
 
clnpInErrSRUnspecs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unspecified source route CLNP Error
            PDUs received by this entity."
    ::= { error 13 }
 
clnpInErrSRSyntaxes OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route syntax CLNP Error PDUs
            received by this entity."
    ::= { error 14 }
 
clnpInErrSRUnkAddrs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route unknown address CLNP
            Error PDUs received by this entity."
    ::= { error 15 }
 
clnpInErrSRBadPaths OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route bad path CLNP Error
            PDUs received by this entity."
    ::= { error 16 }
 
clnpInErrHops OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hop count exceeded CLNP Error PDUs
            received by this entity."
    ::= { error 17 }
 
clnpInErrHopReassms OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hop count exceeded while
            reassembling CLNP Error PDUs received by this
            entity."
    ::= { error 18 }
 
clnpInErrUnsOptions OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported option CLNP Error PDUs
            received by this entity."
    ::= { error 19 }
 
clnpInErrUnsVersions OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of version mismatch CLNP Error PDUs
            received by this entity."
    ::= { error 20 }
 
clnpInErrUnsSecurities OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported security option CLNP
            Error PDUs received by this entity."
    ::= { error 21 }
 
clnpInErrUnsSRs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported source route option
            CLNP Error PDUs received by this entity."
    ::= { error 22 }
 
clnpInErrUnsRRs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported record route option
            CLNP Error PDUs received by this entity."
    ::= { error 23 }
 
clnpInErrInterferences OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of reassembly interference CLNP Error
            PDUs received by this entity."
    ::= { error 24 }
 
clnpOutErrUnspecs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unspecified CLNP Error PDUs sent by
            this entity."
    ::= { error 25 }
 
clnpOutErrProcs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of protocol procedure CLNP Error PDUs
            sent by this entity."
    ::= { error 26 }
 
clnpOutErrCksums OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of checksum CLNP Error PDUs sent by
            this entity."
    ::= { error 27 }
 
clnpOutErrCongests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of congestion drop CLNP Error PDUs
            sent by this entity."
    ::= { error 28 }
 
clnpOutErrHdrs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of header syntax CLNP Error PDUs sent
            by this entity."
    ::= { error 29 }
 
clnpOutErrSegs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of segmentation disallowed CLNP Error
            PDUs sent by this entity."
    ::= { error 30 }
 
clnpOutErrIncomps OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of incomplete PDU CLNP Error PDUs sent
            by this entity."
    ::= { error 31 }
 
clnpOutErrDups OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of duplicate option CLNP Error PDUs
            sent by this entity."
    ::= { error 32 }
 
clnpOutErrUnreachDsts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unreachable destination CLNP Error
            PDUs sent by this entity."
    ::= { error 33 }
 
clnpOutErrUnknownDsts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unknown destination CLNP Error PDUs
            sent by this entity."
    ::= { error 34 }
 
clnpOutErrSRUnspecs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unspecified source route CLNP Error
            PDUs sent by this entity."
    ::= { error 35 }
 
clnpOutErrSRSyntaxes OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route syntax CLNP Error PDUs
            sent by this entity."
    ::= { error 36 }
 
clnpOutErrSRUnkAddrs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route unknown address CLNP
            Error PDUs sent by this entity."
    ::= { error 37 }
 
clnpOutErrSRBadPaths OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of source route bad path CLNP Error
            PDUs sent by this entity."
    ::= { error 38 }
 
clnpOutErrHops OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hop count exceeded CLNP Error PDUs
            sent by this entity."
    ::= { error 39 }
 
clnpOutErrHopReassms OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hop count exceeded while
            reassembling CLNP Error PDUs sent by this entity."
    ::= { error 40 }
 
clnpOutErrUnsOptions OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported option CLNP Error PDUs
            sent by this entity."
    ::= { error 41 }
 
clnpOutErrUnsVersions OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of version mismatch CLNP Error PDUs
            sent by this entity."
    ::= { error 42 }
 
clnpOutErrUnsSecurities OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported security option CLNP
            Error PDUs sent by this entity."
    ::= { error 43 }
 
clnpOutErrUnsSRs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported source route option
            CLNP Error PDUs sent by this entity."
    ::= { error 44 }
 
clnpOutErrUnsRRs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of unsupported record route option
            CLNP Error PDUs sent by this entity."
    ::= { error 45 }
 
clnpOutErrInterferences OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of reassembly interference CLNP Error
            PDUs sent by this entity."
    ::= { error 46 }
 
-- the ES-IS group
 
-- Implementation of this group is recommended for all
-- systems which implement the End-System to Intermediate
-- System protocol.
 
esisESHins OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of ESH PDUs received by this entity."
    ::= { es-is 1 }
 
esisESHouts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of ESH PDUs sent by this entity."
    ::= { es-is 2 }
 
esisISHins OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of ISH PDUs received by this entity."
    ::= { es-is 3 }
 
esisISHouts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of ISH PDUs sent by this entity."
    ::= { es-is 4 }
 
esisRDUins OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of RDU PDUs received by this entity."
    ::= { es-is 5 }
 
esisRDUouts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of RDU PDUs sent by this entity."
    ::= { es-is 6 }
 
END